H600T is a newly developed micro intelligent control air system that provides excellent aerodynamic performance in a compact space. The system comes with a 33% duty cycle, 150PSI rated pressure H600 compressor, 12-port miniature aluminum alloy gas tank, 85PSI on / 105PSI off pressure switch, 40A relay, automatic coupler and installation wiring harness. It can not only quickly inflate car tires, rubber boats, etc., but can also be used with small pneumatic tools such as pneumatic wrenches, and can also perform professional pneumatic function applications, such as: air suspension, air horn, central differential lock, etc.
| FEATURES | SPECIFICATIONS |
| ●400C Compressor w/Thermal Overload Protector | ●12-Volt |
| ●0.25 Gallon Extruded Aluminum Air Tank (12-port) | ●Permanent Magnetic Motor |
| ●Pre-installed Safety Valve | ●Duty Cycle: 33% @ 100 PSI |
| ●Pre-installed 1/8” NPT Drain Cock | ● Max. Working Pressure: 150 PSI |
| ● Pre-installed Safety Valve | ●Max. Amp Draw: 30-Amps |
| ●Pre-installed 85/105 PSI Pressure Switch | ●Max. Amp Draw: 46-Amps |
| ●(8) Pre-installed 1/4” NPT Recessed Port Plugs | ●Ingress Protection Rating: IP67 |
| ●Pre-installed Quick Connect Coupler | ●Max Ambient Temp: +80℃ |
| ● 40-Amp Relay | ●Min Ambient Temp: -30℃ |
| ●(2) 1/4” NPT to 1/8” BSP Adapters | ●Dimensions: 229×102×171(L×W×H,mm) |
| ●1/4” NPT M Barbed Fitting for 3/8” Air Line | ● Net Weight: 4.54kg |
| ●Coiled Air Line (For Remote Mount Air Filter Installation) | |
| ●Air Filter Housing | |
| ●(2) Replacement Air Filter Elements | |
| ●Mounting Hardware |
| PERFORMANCE DATA | |||||
| 12-VOLT COMPRESSOR | |||||
| PSI | CFM | A | BAR | LPM | A |
| 0 | 2.62 | 15 | 0 | 74 | 16 |
| 10 | 2.39 | 18 | 1 | 65 | 20 |
| 20 | 2.21 | 20 | 2 | 60 | 23 |
| 30 | 2.11 | 22 | 3 | 56 | 25 |
| 40 | 2.01 | 24 | 4 | 53 | 27 |
| 50 | 1.93 | 25 | 5 | 49 | 28 |
| 60 | 1.84 | 26 | 6 | 46 | 28 |
| 70 | 1.73 | 27 | 7 | 43 | 28 |
| 80 | 1.65 | 27 | 8 | 38 | 28 |
| 90 | 1.52 | 27 | 9 | 35 | 27 |
| 100 | 1.45 | 27 | 10 | 31 | 27 |
| 110 | 1.35 | 27 | |||
| 120 | 1.26 | 27 | |||
| 130 | 1.19 | 27 | |||
| 140 | 1.08 | 27 | |||
| 150 | 1.01 | 26 | |||
| * Supply Voltage: 13.8 Volts | |||||
| FILL RATES | |
| 12-VOLT COMPRESSOR | |
| 31” X 10.5” | FILL RATE |
| 0 to 30 PSI | 3 min. 00 sec. (± 10 sec.) |
| 15 to 30 PSI | 1 min. 35 sec. (± 05 sec.) |
| 33” X 12.5″ | FILL RATE |
| 0 to 30 PSI | 4 min. 20 sec. (± 10 sec.) |
| 15 to 30 PSI | 2 min. 05 sec. (± 05 sec.) |
| 35” X 12.5” | FILL RATE |
| 0 to 30 PSI | 5 min. 20 sec. (± 15 sec.) |
| 15 to 30 PSI | 2 min. 45 sec. (± 10 sec.) |
Please Note: Please Note: Use thread sealant for proper installation. Thread tape is not recommended.
Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.